24 Port Gigabit Ethernet PoE Switch – User Manual Page 17 of 72
________________________________________________________________________
©2014 MICROSENS GmbH & Co. KG – Hamm/Germany www.microsens.com
3. Operation of
Web-based Management
This chapter would introduce how to manage your Web Smart Switch and how to
configure the 10/100/1000Mbps TP Ports and Gigabit SFP Fiber ports on the switch via
web user interfaces. The Web Smart Switch provides 20 fixed Gigabit Ethernet TP ports
and 4 Gigabit dual media ports. With this facility, you can easily access and monitor the
status like port activity and multicast traffic through any ports on the switch.
The default values are listed in the table below:
Table 3-1
When the configuration of your switch is finished, you can browse it by the IP ad-
dress you set up. For instance, type http://192.168.1.1 in the address row in a browser,
then the following screen (see Fig.4-1) would show up and ask for your password input
for login and access authentication. The default password is “admin”. For the first time
access, please enter the default password, and click <Apply> button. The login process
now would be completed.
Web Smart Switch supports a simplified user management function which allows
only one administrator to configure the switch at one time.
To optimize the display effect, we recommend Microsoft IE and 1024x768 display
resolution.
Fig. 3-1
To Next Page
Loading...
Need help?
General
