24 Port Gigabit Ethernet PoE Switch – User Manual Page 45 of 72
________________________________________________________________________
©2014 MICROSENS GmbH & Co. KG – Hamm/Germany www.microsens.com
3-2-13. Broadcast Strom Protection
Function name
Broadcast Strom Protection configuration
Function description
When the broadcast packets received by the switch exceed the threshold configured,
the port will be blocked for a period of time which can be set. After a configured
time, the switch will detect whether the broadcast packets received on the port still
exceed the threshold. If the broadcast traffic is still higher than, the port will be
closed for a period of time again. If the broadcast traffic is under the threshold, the
port will re-open and forward the packets normally.
Fig. 3-20 Rate Limit Configuration
To Next Page
Loading...
Need help?
General
