Microtek ArtixScan DI 2125c - Open View

ArtixScan DI 2125c User's Manual 11
F1
E
r
r
o
r
R
e
a
dy
Open View
No. Names of Parts Functions of Parts
1 Tray Extender Used to extend the length of the Document Feed Tray.
2 Document Feed Tray Holds the documents to be fed into the feeder.
3 Guide Arm Slides to hold a stack of documents.
4 Scanner Cover The cover of the scanner.
5 Feed Roller Assembly Used to feed documents into the feeder.
6 Glass Surfaces The places where the CIS cartridges are stored.
7 Separation Roller Assembly Used to separate each sheet of documents when a
stack of documents are fed into the feeder.
8 Pick Rollers Used to pick up documents into the feeder.
9 Output Rollers Used to eject documents after scanning.
10 Card Tray Holds the card to be fed into the feeder.