EasyManua.ls Logo

Microtek ArtixScan DI 2125c - Replacing the Feed Roller Assembly

Microtek ArtixScan DI 2125c
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ArtixScan DI 2125c User's Manual 39
Replacing the Feed Roller Assembly
1. Open the scanner cover. Locate the Feed Roller Assembly at the bottom of
the scanner.
Feed Roller Assembly
2. Loosen the screws on the roller cover with a screwdriver. Then hold the roller
cover and pull it out carefully.
Scanner cover
Roller cover

Table of Contents

Related product manuals