Name: Microtek ArtixScan DI 2125c
Brand: Microtek
Rating: 5 (1 reviews)

To Next Page

To Previous Page

ArtixScan DI 2125c User's Manual 37

Maintenance

The Separation Roller Assembly and the Feed Roller Assembly in your scanner are

designed to make document feeding smooth. After usage for a period of time, the

Separation Roller Assembly and Feed Roller Assembly may become worn, and a

problem such as document double-feed may occur. In this case, check either the

Separation Roller Assembly or the Feed Roller Assembly, and replace them if

needed. Follow the procedure below for replacement of the Separation Roller

Assembly and Feed Roller Assembly.

Replacing the Separation Roller Assembly

1. Open the scanner cover. Locate the Separation Roller Assembly at the top of

the inner side of the scanner cover.

2. Push down and then pull the cover lever to open the roller cover first. Hold

both sides of the rollers to pull out the Separation Roller Assembly from its

compartment.

Roller cover

Separation roller assembly

Scanner cover

Separation Roller Assembly

Questions and Answers:

Need help?

Do you have a question about the Microtek ArtixScan DI 2125c and is the answer not in the manual?

Microtek ArtixScan DI 2125c Specifications

Scanning Specifications

optical resolution	600 x 600 dpi
scanning speed (simplex, line art)	20 ppm at 200 dpi
scanning speed (simplex, grayscale)	20 ppm at 200 dpi
scanning speed (simplex, color)	15 ppm at 200 dpi
scanning speed (duplex, line art)	40 ipm at 200 dpi
scanning speed (duplex, grayscale)	40 ipm at 200 dpi
scanning speed (duplex, color)	30 ipm at 200 dpi
scanning area	8.5" x 65" (216 mm x 1651 mm)

Paper Handling

feeder capacity	up to 20 sheets of 20 lb. paper or 1 piece of card
paper weight	10.7 to 32 lbs. (40-120 g/m²)
paper size minimum	3.15" x 2.1" (80 mm x 52 mm)
paper size maximum	8.5" x 65" (216 mm x 1651 mm)
card thickness	up to 0.078" (2 mm)

Roller Life