Microtest 6375 - Standard Operation Status Commands

6–12
Command
Name
Description
*OPC
Operation Complete Command
Sets the OPC bit of the ESR register.
*OPC?
Operation Complete Query
Always returns 1 as instrument commands are always
processed sequentially.
*WAI
Wait-to-continue
Command has no effect as commands are processed
sequentially.
*LOC
Local
Set the instrument to local state.
6.1.8 Standard Operation Status Commands
Refer to section 6.1.6 for an explanation of the following commands.
Command
Description
Query
Read Status Operation
Condition register.
:STATus:OPERation:CON?
Read Status Operation
Event register
:STATus:OPERation:EVENt?
:STATus:OPERation:ENABle <NR1>
Set Status Operation
Enable Register