Microtest 6375 - 7.9 General; 7.10 Environmental Conditions

7–9
7.9 General
7.9.1 Power Supply
Input Voltage
115V AC ±10% or 230V AC ±10% (selectable)
Frequency
50/60Hz
VA rating
150VA max
Input fuse rating
115/230V operation: 3AT
The input fuse is in the fuse holder drawer integral to the IEC input connector.
7.9.2 Display
High contrast black and white LCD module 320 x 240 pixels with CPL back lighting.
Visible area 115 x 86mm.
7.9.3 Remote Control
Designed to GPIB IEEE-488.2 and SCPI 1992.0.
7.9.4 Remote Trigger
Rear panel phone jack with internal pull-up, operates on logic low or contact closure.
7.9.5 Mechanical
Height
150mm
Width
340mm
Depth
460mm
Weight
6.5kg
7.10 Environmental Conditions
This equipment is intended for indoor use only in a non-explosive and non-corrosive
atmosphere.
7.10.1 Temperature Range
Storage: -40°C to +70°C.
Operating: 0°C to 40°C.
Normal accuracy: 23±5°C.
7.10.2 Relative Humidity
Up to 80% non-condensing.