Microtest 6375 - 6.2 6375 Series Device-Specific Commands

6–13
6.2 6375 Series Device-Specific Commands
The sub-system commands are grouped in different modes similar to the local operation. The
recommended discipline to control the instrument under GPIB is to select the mode and the
type of test first, then change the measurement conditions. Trying to change measurement
conditions which are not in the present mode and type of test will be rejected and return an
error flag.
6.2.1 Command Summary
Command
Summary
Page
:MEAS
Select measurement mode/path.
6-17
:MEAS:TEST
Select test sub-path within measurement mode.
6-17
:MEAS:TEST:AC
Select AC measurement.
6-17
:MEAS:TEST:RDC
Select Rdc measurement.
6-17
:MEAS:TEST?
Measurement test query.
6-18
:MEAS:TRIGger
Trigger an AC or Rdc measurement.
6-18
:MEAS:FREQuency <real>
Set frequency of AC measurement.
6-18
:MEAS:FREQuency?
Frequency query.
6-18
:MEAS:LEVel <real>
Set drive level for currently selected test.
6-19
:MEAS:LEVel?
Drive level query.
6-19
:MEAS:SPEED <disc>
Select measurement speed.
6-19
:MEAS:SPEED?
Speed query.
6-19
:MEAS:RANGE <disc>
Select auto-ranging or range-hold on range N.
6-20
:MEAS:RANGE?
Range query.
6-20
:MEAS:EQU-CCT <disc>
Select equivalent circuit.
6-20
:MEAS:EQU-CCT?
Equivalent circuit query.
6-20
:MEAS:FUNC
Select function sub-path within measurement mode.
6-21
:MEAS:FUNC:C, L, X, B, Z, Y, Q, D, R or G
Select first or second AC measurement function.
6-21
:MEAS:FUNC:MAJOR?
First AC function query.
6-22
:MEAS:FUNC:MINOR?
Second AC function query.
6-22
:MEAS:SCALE <disc>
Show / Hide the scale bar.
6-23
:MEAS:SCALE?
Scale status query.
6-23
:MEAS:NOMinal <real>
Set nominal value for scale.
6-23