Microtest 6375 - Page 67

6–29
MULTI-STEP MODE
: MULTI:LOw-LIMit <real>
Set the lower test limit of the currently
selected step.
Parameters:
The required lower limit.
Example: :MULTI:LO-LIM
10.0
will set a low limit to 10.
Response:
None.
: MULTI:LOw-LIMit?
Returns the low limit value of the currently
selected step.
Parameters:
None.
Response:
The low limit value in engineering
format.
Example: -.50000000E+01
indicates a high limit to 5.
:MULTI:DELAY <real>
Set the delay time of the currently selected
step.
Parameters:
The required delay time in Second.
Example: :MULTI:DELAY 0.1
:MULTI:DELAY 100m
will set delay time to 0.1 Second.
Response:
None.
:MULTI:DELAY?
Returns the delay time of the currently
selected step.
Parameters:
None.
Response:
Example: : 0.1
Indicates the delay time is 0.1 Second.
:MULTI:DEL
Remove the current step.
Parameters:
The step number in the range 1 to 30
Example: MULTI:DEL 1
will delete the top step.
Response:
None.