EasyManua.ls Logo

Microwave Data Systems MDS 4310 - Appendix I Canadian Certification; Canadian Regulatory Approvals and Restrictions

Microwave Data Systems MDS 4310
129 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MDS 05-2415A01, Rev. A I-1
APPENDIX I
CANADIAN CERTIFICATION
RSS APPROVALS
The MDS 4310 Transceiver has been approved for use in Canada under Radio Standards
Specification (RSS) 119 and 122 of Industry Canada (IC) certification. The frequency ranges
and channel spacings for this application are as follows:
RSS-119
Frequency Range: Transmit —406.1–430, 450–470 MHz
Receive —406.1–430, 450–470 MHz
Channel Spacing: 25 kHz
Power Output: 1 to 5 watts, continuously variable
RSS-122
Frequency Range: Transmit —406.1–430 MHz
Receive —406.1–430 MHz
Channel Spacing: 12.5 kHz
Power Output: 1 to 5 watts continuously variable
RESTRICTIONS
The Industry Canada approval is valid subject to the restrictions listed below:
1. The MDS 4310 may only be used with a built-in modem at speeds of either 1200,
4800 or 9600 bps. No external modems or other signaling devices using external
transmit audio input (Pin 9 of the INTERFACE connector) are permitted.
2. The Order Wire Module (MDS P/N 02-1297A01) may not be used with the
transceiver.

Table of Contents

Related product manuals