Service Manual, 2016-12
11 / 47
3.5Change the door opening direction(None)
3.6 Installation of handle
1.Take out ①,use a cross screwdriver to drive① into the screw hole② on the door body and
tighten it.
2.Align the screw hole on the handle with the tightened ① to fix the handle;
3.Tighten ③ on the handle side;
4.Put ④ onto the handle side hole ③ to complete handle installation.
3.7 Installation of door lock（None）
3.8 Adjustment to level the door（None）
3.9 Adjustment to shelves（None）
To Next Page
Loading...
