Midea UL-BD386WE-SQ

Service Manual, 2016-12
26 / 47
2. Remove the clipping strip
Slowly pull it out
3. Remove the protective cover
1）Pry the protective cover slowly from the upper part,
2）Pull it out and remove it.
4. Remove the starter and protector
Unplug the starter and protector (you can use a screwdriver
to pry it slowly)
5. The reverse process can complete installation.
/
8.7Display and main control panel
Display control board
1） Use vacuum cap to pull the control panel
outwards
2） Disconnect the connector of display control
board, remove it