12
3. Remove clamp for fixing connecting hose to inlet valve, and contrarotate inlet valve to take it
out.
4. Reverse the above procedure to install. And check out all connectors connected well.
The outer door covers the door to the dishwasher and protects the detergent dispenser.
Removal and Installation
1. Open the door of dishwasher. And remove all screws for fixing control panel.
2. Remove screw and unfix all snaps for fixing the operating board.
3. Reverse the above procedure to install. And check out all connectors connected well.
1
2
Screw
snaps
snaps
Clamps
Terminals
Screws
Screw
To Next Page
Loading...
