© Midmark Corporation 2016
Thin Client Using the IQpath™ Software Solution
IQpath™ utilizes a dedicated flow control scheme to provide the following advantages over COM port
mapping:
• Improved operation over high-latency, low-bandwidth, high-loss networks:
− Microsoft Terminal Services: Improvement is approximately 10-to-1 in latency tolerance.
− VMware VDI: Improvement is approximately 10-to-1 in latency tolerance.
− Citrix
®
ICA
®
protocol: Improvement is approximately 40-to-1 in latency tolerance.
• No COM port mapping is required.
• The USB version of the ECG module is compatible.
• Improved device auto-configuration and diagnostics.
The following block diagram describes IQpath™. In this thin client environment, the client computers must be running Windows
®
10,
8, or 7:
Figure 2
IQpath™ has specific requirements for computer hardware,
software, and network performance. System administrators
should read Setup Manual: Midmark Products over Thin Client
using IQpath™ before installing, configuring, and using this
software in a thin client environment.
To Next Page
Loading...
