© Midmark Corporation 2016
Physician’s Responsibility
The interpretations provided by the Midmark IQecg
®
are for the exclusive use of licensed physicians or personnel under their direct
supervision. Not all electrocardiogram (ECG) abnormalities can be detected by computerized automated ECG analysis algorithm. The
suggested interpretation, including numerical and graphical results, should be examined with respect to the patient’s overall clinical
condition.
It is the responsibility of the physician to ensure proper administration of the test, making a diagnosis, obtaining expert opinions
on the results, and instituting the correct treatment.
Related Documents
The following documents may be needed in order to operate Midmark diagnostic devices and software products with the IQecg
®
Digital ECG:
• IQecg
®
Quick Reference User’s Guide – Performing a 12-lead Resting ECG Test (Part number: 48-79-
0002)
• IQmanager
®
Software Operation Manual (Part number: 62-78-0001)
• Setup Manual: Midmark Products over Thin Client using IQpath™ or COM port mapping (Part number: 61-78-0001)
All documents referenced above are located on the Midmark Operation Manuals CD (part number: 3-100- 2000), included with every
device. All product Operation Manuals can also be downloaded from midmark.com. For additional information, contact Midmark
Technical Service at (800) 624-8950 or (844) 856-1230, option 2.
Caution
Federal law restricts this device to sale by or on the order of a physician.
Caution
The automated ECG analysis algorithm assumes standard 12-lead ECG placement. Any
deviation from the standard 12-lead ECG placements may affect the accuracy of the
automated interpretation.
Caution
Follow standard 12-lead ECG placement when performing a STAT ECG.
To Next Page
Loading...
