Miele DGC 6300 - Advanced Operation; Switching on and off Automatically

Operation: Steam cooking
35
Advanced operation
Setting further durations
You have placed the food in the oven,
selected a temperature and a duration.
 Touch .
Further options will appear in the
display which you can select or change
for your programme:
– Ready at
– Start at
You can set the programme to switch
off or on and off automatically by
setting Ready at or Start at.
– Ready at
You specify the time you want
cooking to stop.
– Start at
You specify the time you want
cooking to start.
Cooking results can be impaired if
there is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.
If the temperature in the oven is too
high, e.g. just after another
programme, you will not be able to
use this function. Ready at / Start at will
not appear in the display if this is the
case. Open the oven door until the
appliance has cooled down.
Switching on and off automatically
To switch a cooking programme on and
off automatically you have a choice of
how to enter the time parameters:
– Duration and Ready at
– Duration and Start at
Example: it is 11:45. The food takes 5
minutes to cook and should be ready at
12:30.
 Touch .
 Scroll through the list until Duration is
highlighted.
 Confirm with OK.
 Set "00:05" and confirm with OK.
 Scroll through the list until Ready at is
highlighted.
 Confirm with OK.
 Scroll through the list until Change is
highlighted.
 Confirm with OK.
 Set "12:30" and confirm with OK.
Start at is calculated automatically. The
cooking duration entered is added to
the heating-up time calculated by the
steam oven.
Start at 12:18 appears in the display.
The cooking programme will start
automatically at this time.