Miele DGC 6300 - Sequence of an Automatic Programme; Changing Settings During a Programme

Operation: Functions without steam
47
Sequence of an automatic
programme
Up until the start the function, the
selected temperature, Start at and the
start time will appear in the display.
After the start time you can see the
temperature increasing in the display
during the heating-up phase until the
set temperature is reached. Once this
temperature is reached a tone will
sound.
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
At the end of the programme the oven
compartment heating will switch off. A
tone or melody will sound (see
"Settings - Acoustic tones").
Prog. finished will appear in the display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via .
Changing settings during a
programme
 Touch .
The following will appear in the display:
– Temperature
– Duration
– Ready at
– Start at
This only appears if a Duration or a
Ready at time has been set.
Changing the temperature
 Scroll through the list until
Temperature is highlighted.
 Confirm with OK.
 Change the temperature.
 Confirm with OK.
The steam oven will be heated up or
cooled down until the altered
temperature is reached.
You can permanently reset the
recommended temperature to suit
your own cooking preferences. (See
"Settings - Recommended
temperatures").