Miele DGC 6300 - Starting and Modifying User Programmes

User programmes
53
To start a User programme
 Place the food in the oven.
 Select User programmes.
The programme names will appear with
Edit programme underneath them in the
display.
 Scroll through the list until the
programme you want is highlighted.
 Confirm with OK.
You can start the saved programme
immediately, delay the start or change
the cooking stages.
– Start now
The programme will start. The oven
compartment lighting and the steam
generator will switch on immediately.
– Ready at
You specify the time you want
cooking to stop.
– Start at
You specify the time you want
cooking to start.
– Change cooking stages
You can change the specified
settings for a cooking stage or add
more cooking stages to the
programme (see "To change a User
programme").
 Scroll through the list until the
function you want is highlighted.
 Confirm with OK.
The programme will start according to
the specified start or finish time.
To change a User programme
Changing cooking stages
Cooking stages in an Automatic
programme that you have renamed as
a User programme cannot be
changed.
 Select User programmes.
The programme names will appear with
Edit programme underneath them in the
display.
 Scroll through the list until Edit
programme is highlighted.
 Confirm with OK.
 Scroll through the list until Change
programme is highlighted.
 Confirm with OK.
 Scroll through the list until the
programme you want is highlighted.
 Confirm with OK.
Change cooking stages will be
highlighted.
 Confirm with OK.
Cooking stage 1 is highlighted. You can
change the specified settings for one
cooking stage or add cooking stages to
the programme.
 Scroll through the list until the
cooking stage you want or Add
cooking stage is highlighted in the
display.
 Confirm with OK.
 Change the programme as you wish
(see "To create a User programme")
and confirm with OK.