User programmes
51
You can create and save up to 20 of
your own programmes.
– Each one can have up to 10 cooking
stages. This enables you to save your
favourite or most frequently used
recipes very accurately. You can save
individual settings for each stage.
– You can enter the name of the
programme for your recipe.
When you next select the programme it
will start automatically.
There are different ways of creating a
User programme:
– At the end of an Automatic
programme, save it as a User
programme.
– After running a programme with a set
duration, save it.
Then name the programme.
To create a User programme
Select User programmes.
The first time you create a User
programme Create programme will
appear in the display.
Confirm with OK.
If User programmes already exist, the
programme names will appear with Edit
programme underneath them.
Scroll through the list until Edit
programme is highlighted.
Confirm with OK.
Create programme will be highlighted.
Confirm with OK.
You can now specify the settings for
cooking stage 1.
Follow the instructions in the display:
Select and confirm the cooking
function, temperature, moisture level
if required and duration.
Settings for the 1st cooking stage have
now been set.
You can add more cooking stages, for
example, if you want to add another
cooking function to follow on from the
first:
Scroll through the list until Add cooking
stage is highlighted.
Confirm with OK.
Proceed as for the 1st cooking stage.
When all necessary cooking stages
have been set, scroll through the list
until Finish programme is highlighted.
Confirm with OK.