Miele G 7804 - Page 3

Programme sequence indicators .....................................37
Programme end ...................................................37
Switching off .....................................................37
Cancelling a programme ............................................38
Programme cancellation due to a fault...............................38
Cancelling the programme manually ................................38
Programmable functions...........................................39
The following applies to all programmable functions: ......................39
To activate programming mode ....................................39
To save values and exit from programming mode ......................39
To exit from programming mode without saving .......................39
Dispensing liquid cleaning agent via DOS 1.............................40
Setting the dosage concentration...................................40
Venting the dispensing system.....................................40
Dispensing neutralising agent via DOS 3 ...............................41
Setting the dosage concentration...................................41
Venting the dispensing system.....................................41
Buzzer ..........................................................42
Changing programme parameters ....................................43
Changing the temperature ........................................43
Changing the temperature holding time..............................43
Activating Rinse 2 ...............................................44
Delay start .......................................................45
Resetting to factory default settings ...................................46
Maintenance .....................................................47
Service ..........................................................47
Routine checks ...................................................47
Cleaning the filters in the wash cabinet.................................48
Cleaning the coarse filter .........................................48
Cleaning the flat and micro-fine filters ...............................49
Cleaning the spray arms ............................................50
Cleaning the control panel...........................................51
Cleaning the front of the machine .....................................51
Cleaning the wash cabinet ..........................................51
Cleaning the door seal..............................................51
Dispensing systems................................................51
Baskets and inserts ................................................52
Problem solving guide ............................................53
Contents
3