Miele G 7804 - Page 4

Other problems ..................................................60
Thermal cut-out ...................................................60
Cleaning the drain pump and non-return valve...........................61
Cleaning the filters in the water inlet ...................................62
After sales service ................................................63
Installing the machine .............................................64
Building the machine under a continuous worktop ........................64
Electrical connection..............................................66
Plumbing........................................................67
Connection to the water inlet .........................................67
AD water connection (pressurised) ö 0.6 - 10 bar (60 - 1000 kPa) .........68
AD water connection (non- pressurised) 0.085 - 0.6 bar (8.5 - 60 kPa)
(optional)......................................................68
Drainage ........................................................69
Programme chart .................................................70
Technical data ...................................................72
Contents
4