Adding rinsing agent
Rinsing agent is necessary to ensure
water does not cling and leave marks
on items, and to help items dry faster
after they have been washed.
Rinsing agent is poured into the
storage reservoir and the amount set is
dispensed automatically.
The rinsing agent reservoir holds
approx. 180 ml.
,
Only fill the rinsing agent
reservoir with rinsing agent
formulated for washer-disinfectors.
Do not fill it with cleaning agent.
This would damage the reservoir.
^ Open the door fully.
^
Undo the screw cap.
^
Add rinsing agent until the level
indicator is dark (see arrow in the
illustration). Use a funnel if
necessary.
^ Screw the cap back on.
^ Mop up any spilt rinsing agent. This
prevents over-foaming occurring
during the next programme.
Dispensing chemical agents
25
To Next Page
Loading...
Need help?
General
