Programmable functions...........................................34
The following applies to all programmable functions: ......................34
To activate programming mode ....................................34
To save values and exit from programming mode......................34
To exit from programming mode without saving .......................34
Dispensing liquid cleaning agent via DOS 1.............................35
Setting the dosage concentration...................................35
Venting the dispensing system.....................................35
Dispensing neutralising agent via DOS 3 ...............................36
Setting the dosage concentration...................................36
Venting the dispensing system.....................................36
Buzzer ..........................................................37
Changing programme parameters ....................................38
Changing the temperature ........................................38
Changing the temperature holding time..............................39
Resetting to factory default settings ...................................39
Setting the time and date............................................40
Data transfer (optional) ............................................41
Maintenance .....................................................42
Periodic checks ...................................................42
Process validation .................................................43
Routine checks ...................................................43
Cleaning the filters in the wash cabinet.................................44
Cleaning the coarse filter .........................................44
Cleaning the flat and micro-fine filters ...............................45
Cleaning the control panel...........................................47
Cleaning the front of the machine .....................................47
Cleaning the wash cabinet ..........................................47
Cleaning the door seals.............................................47
Dispensing systems................................................47
Baskets and inserts ................................................48
Protein test .......................................................48
Problem solving guide ............................................49
Other problems ..................................................57
Thermal cut-out ...................................................57
Cleaning the drain pump and non-return valve...........................58
Cleaning the filters in the water inlet ...................................59
Contents
3
To Next Page
Loading...
Need help?
General
