Miele G 7881 Operating Instructions

Fault Possible cause Remedy
The w indicator starts
flashing before the
start of a programme.
The programme cannot
be started.
Before trying to rectify the
problem, you must:
–
Turn the programme
selector to f (the fault
code goes out).
–
Switch the machine off
with the I-0 switch.
Fault code: Fdo:
The neutralising agent
container is empty.
Fill the container with
neutralising agent or
replace it with a new, full
container.
Then:
– Switch the machine on.
– Start the programme
again.
A few minutes after the
start of a programme,
the w indicator flashes
and the programme is
cancelled.
Before trying to rectify the
problem, you must:
– Turn the programme
selector to f (the fault
code goes out).
– Switch the machine off
with the I-0 switch.
Fault code: Fdo:
Fault with the system for
dispensing neutralising
agent.
Fill the container with
neutralising agent or
replace it with a new, full
container.
Vent the dispensing
system, see
"Programmable functions".
Then:
–
Switch the machine on.
–
Start the programme
again.
Problem solving guide
51

Miele G 7881 Specifications

General

Brand	Miele
Model	G 7881
Category	Washer
Language	English