Once a program cycle has started, all
other programs are locked until
completion. If the program selector is
turned to a different program, the
display goes out. The display will
re-appear if the program selector is
turned back to the running program.
During a program, the "Display" ß
button can be used to toggle between
the:
–
actual temperature
–
elapsed program time, and
–
active wash block
(depending on model):
1 = Pre-rinse 1
2 = Pre-rinse 2
3 = Main wash 1
4 = Main wash 2
5 = Chemical Disinfection
6 = Interim rinse 1
7 = Interim rinse 2
8 = Interim rinse 3
9 = Interim rinse 4
10 = Final rinse 1
11 = Final rinse 2
12 = Drying
Program sequence display
Whenever a program is running, the
indicator light for that program remains
on.
Recharging
Pre-Wash1+2
Wash1+2*
Rinse1-4/Final rinse1+2
Dry
Complete
(Program parameter achieved)
Use
35
To Next Page
Loading...
