Periodic maintenance for the lab
washer is recommended annually.
Routine checks
The routine checks must be done daily
by the user before using the machine.
For the routine checks a checklist is
supplied with the machine.
Check the following points:
–
the filters in the base of the wash
cabinet must be empty,
–
the spray arms in the machine and at
the baskets should be clear,
– the wash cabinet and the door
gasket should be clear,
– the dispensing systems, and
– the baskets and inserts.
When using powder detergent the
temperature at the time of dosing must
be checked every 2 weeks. The dosing
temperature is found under Validation
in the Validation Protocol.
The temperature review must be
completed during a running program,
when the container lid can be heard
opening. The temperature in the display
can be compared with that shown in
the validation protocol.
,
If the temperature is found to be
more that 2° plus or minus the
required temperature, please
contact Miele.
Maintenance
48
To Next Page
Loading...
