Changing program parameters
The wash programs can be adjusted to meet various technical requirements. For
example, the temperatures and cycle times for the program blocks Main Wash 1
and Main Wash 2, and Rinse 1 and Rinse 2, can be changed.
Consult the "Program guide" for a list of cycle temperatures and running times.
Be sure to document any changes made to a program, e.g., by making a note in
the corresponding column in the program guide.
Adjustable temperature range:
–
30 °C - 93 °C in all programs except "Rinse", "Drain" and "Special".
Adjustable holding time range:
– 1 - 15 min.
How to change the temperature
Step Display / Result
^ Press and hold the 0 button until the level with the
desired program block appears in the display.
E09 for Main Wash 1
E12 for Main Wash 2
E22 for Rinse 1
E25 for Rinse 2
^
Turn the program selector to the program you wish
to change, e. g., Custom.
°C ~65
^
Press and hold the ß button until the required value
appears in the display, e.g., 70 °C.
°C ~70
Programming functions
44
To Next Page
Loading...
