Cleaning the spray arms
The spray arms can get clogged.
Check daily and clean if necessary.
Removing the spray arms
^
Remove the baskets.
Spray arm at the upper basket or
mobile unit (if available):
^
Loosen the knurled nut and remove
the spray arm.
Metal knurled nuts have a left-hand
thread. Ceramic knurled nuts have a
right-hand thread.
^
Unscrew the upper spray arm.
^
Loosen the knurled nut of the lower
spray arm and remove.
^
Use a sharp pointed object to push
particles into the spray arm jets and
rinse thoroughly under running water.
^
Refit the spray arms in reverse order
after cleaning.
After replacing the spray arms
check that they can rotate freely.
Cleaning and Care
51
To Next Page
