Installation
*INSTALLATION*
75
Minimum safety distance underneath
the hob
To install the hob while maintaining the
minimum safety distances, you can
choose from 3variants:
1. Without intermediate shelf or base
panel
2. With intermediate shelf
3. With an air intake-optimised base
panel
Further instructions are described in the
relevant section.
An air intake-optimised base panel
and an intermediate shelf cannot be
combined.
If they are combined, more warm air
is drawn in. The hob is not
adequately cooled.
Rear wall cut-out
For ventilation and accommodating
the mains connection cable, you will
need to create a cut-out in the rear wall.
Create a cut-out in the rear wall using
the following instructions:
To Next Page
