Warning and Safety Instructions
13
The dishwasher must not be used if the electrical connection
cable is damaged. A damaged connection cable may only be
replaced by a specific connection cable of the same type. For safety
reasons, such replacements may only be carried out by a qualified
technician, a Miele dealer or the Miele Service.
The dishwasher must be disconnected from the electrical supply
before any maintenance or repair work is carried out.
The plastic housing of the water connection contains two
electrical valves. The housing must not be immersed in liquids.
There are electrical wires in the water inlet hose. Do not shorten
the water inlet hose, even if it is too long.
The integrated Waterproof system offers protection against water
damage, provided the following conditions are met:
– Installation has been carried out correctly
– The dishwasher is properly maintained and parts are replaced in
case of noticeable damage
– The tap has been turned off during longer absences (for example,
vacation)
The Waterproof system will work even when the dishwasher is
switched off. However, the dishwasher must remain connected to
the electricity supply.
To Next Page
Loading...
