Cleaning and care
56
Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be checked and
cleaned regularly.
Turn the dishwasher off.
Remove the spray arms as follows:
Take out the cutlery tray (if
applicable).
Push the top spray arm upward to
engage the inner ratchet, then
unscrew the spray arm.
Push the middle spray arm upward
to engage the ratchet, then
unscrew the spray arm .
Remove the lower basket.
Pull the lower spray arm firmly
upward to remove it.
Use a pointed object to push food
particles in the jets into the spray
arms.
Rinse the spray arms thoroughly
under running water.
Refit the spray arms and check that
they rotate freely.
To Next Page
Loading...
