Commissioning
25
Add rinse aid only until it is visible in
the opening.
The rinse aid reservoir holds approx.
110ml (3.7oz.).
Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
program.
Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next program.
You can adjust the rinse aid dosage
for best results (see “Settings menu,
Rinse aid”).
Rinse aid indicator
When the Refill rinse aid message
appears in the display, the reservoir
contains sufficient rinse aid for 2 – 3
programs only.
Fill the reservoir with commercial
rinse aid.
Confirm with OK.
The refill indicator will go out.
If you do not want the salt and rinse
aid indicators to appear, you can
switch off both refill indicators for salt
and rinse aid (see “Settings menu,
Switching off the refill indicators”).
To Next Page
Loading...
