Miele PG 8130 U - Problem Solving Guide; Technical Problems

Problem solving guide
59
You can easily resolve many of the minor problems you may encounter during
everyday use. This will save you time and money because you do not have to call
Miele Service.
With the aid of the following guide, the cause of a problem can be found and
eliminated. However, please note:
 Repairs must only be carried out by Miele Service. Unauthorized repairs
could cause personal injury or damage to the machine.
Technical problems
Problem Possible cause and solution
The display remains
dark and the Start
indicator light is not
flashing after the
dishwasher has been
turned on with the
button.
The dishwasher is not plugged in.
 Insert the plug.
The fuse has tripped.
 Reset the fuse (see data plate for the correct fuse
rating).
The dishwasher stops
during a program
The fuse has tripped.
 Reset the fuse (see data plate for the correct fuse
rating).
 If the fuse trips again, contact Miele Service.
The door locking pins
do not retract after the
door has opened
automatically.
There is a fault with the door mechanism or the door
has not been correctly balanced.
 Call Miele Service.
The dishwasher can only be used again with the
AutoOpen function switched off. There is a danger
of injury in the unlikely event of a fault with the
opening mechanism.