Miele PG 8130 U - Flexitimer with Ecostart

Program options:
47
FlexiTimer with EcoStart
With the FlexiTimer, you have three
options for starting the program using
delay start. You can set the start time or
the finish time of a program. You also
have the option of taking advantage of
time variable economy rates of
electricity using the EcoStart function.
When using the FlexiTimer function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed.
 To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the
program, i.e. before you activate the
FlexiTimer with OK. Also activate the
child lock.
 Turn on the dishwasher with the 
button.
The Start indicator light flashes.
 Select the desired program.
 Press the button.
You can use the arrow buttons to
select the Start at, Finish at, EcoStart and
Back  functions.
 Confirm selection of the function you
want with OK.
The current time of day will appear and
the hour number pad will be
highlighted.
You can now enter the time you want
using the  arrow buttons and
confirm with OK.
If, while you are setting the time, you do
not press any buttons for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
If the time of day (clock) display has
been switched off (see “Settings
menu, Time of day”), the display will
go out after a few minutes and only
the Start indicator light will flash
slowly.
Press any button to switch the display
back on again for a few minutes.