Operation
45
Interrupting a program
A program will be interrupted as soon
as the door is opened.
If the door is closed again, the program
will continue from the point it was at
before the door was opened.
Water in the dishwasher may be
hot. Danger of scalding!
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Then raise the door
upwards until the catch engages.
Changing a program
If the detergent dispenser flap has
already opened, do not change the
program.
If a program has already started and
you wish to change it, proceed as
follows:
Turn the dishwasher off with the
button.
Turn the dishwasher on again with the
button.
Select the program you want, and
then start it.
To Next Page
Loading...
