Operation
40
Changing detergent
If you want to change the detergent
used, the system must first be rinsed
through with water to avoid a reaction
between the different detergents.
Remove the suction lance from the
container and place it in a container
of water.
Start “Vent dispensing system” twice
(see “Settings menu, External
dispensing”) the rinse the system.
Then place the suction lance in the
new container and start “Vent
dispensing system” again.
The dispensing system is ready for
operation.
Always follow the recommendations
of the cleaning detergent
manufacturer whether using powder
or liquid cleaning detergent.
To Next Page
Loading...
