Settings menu
79
Time of day
The dishwasher is delivered with the
time of day (clock) display deactivated.
To save energy, the dishwasher will turn
off automatically a few minutes after the
last time a button has been pressed or
after the end of a program.
Setting the time of day (clock) display
When the time of day (clock) display
has been activated, the current time of
day will appear in the display a few
minutes after the last time a button has
been pressed or after the end of a
program. This will increase energy
consumption.
Select the Display option and confirm
with OK.
Select the setting you want and
confirm with OK.
If you have selected On, confirm the
message about higher energy
consumption with OK.
Setting the clock format
You can select either a 24 hour or 12
hour clock.
Select the Clock format menu option.
Select the setting you want and
confirm with OK.
Setting the time of day
You can set the time of day.
The current time of day must be set
before you can use the “FlexiTimer”
programming option.
Select the Set menu option.
Use the arrow buttons to set the
hours and confirm with OK.
Then set the minutes and confirm
with OK.
The time of day has now been saved.
Synchronize
This option is only displayed if you
have activated the network settings
(see “Settings menu, Network”).
You can adopt the current time of day
from another Miele@home SuperVision
machine.
Select the Synchronize menu option.
Select the setting you want and
confirm with OK.
The time from the SuperVision
appliance will be displayed
To Next Page
Loading...
