Cleaning and care
58
To clean the inside of the filter, the flap
must be opened:
Press catches together in the
direction of the arrows as shown, and
open the filter .
Rinse all the filters under running
water.
Then close the flap so that the catch
engages.
Replace the filter combination so that
it lies flat in the base of the wash
cabinet.
Then turn the handle clockwise until
both arrows point toward each other.
This will lock the filter combination in
place.
When you are fitting the filter
combination, take care that it is
secured in position correctly.
Otherwise, coarse soil can get into
the circulation system and cause a
blockage.
To Next Page
Loading...
