Miele PG 8130 U - Page 60

Problem solving guide
60
Problem Possible cause and solution
One of the following
fault messages is
displayed:
Before remedying the fault:
 Turn the dishwasher off with the button.
Fault FXX There may be a technical fault.
After a few seconds:
 Turn the dishwasher back on.
 Select the desired program.
 Press the Startbutton.
If the fault message appears again, there is a
technical fault.
 Call Miele Service.
Waterproof The Waterproof system was activated.
 Turn off the water supply.
 Call Miele Service.
Fault F78 A fault has occurred in the circulation pump.
 Turn the dishwasher off for at least 30 seconds
with the button.
 Turn the dishwasher back on.
 Select the desired program.
 Press the Startbutton.
If the fault message appears again, there is a
technical fault.
 Call Miele Service.