Miele PG 8130 U - Page 49

Program options:
49
EcoStart
The EcoStart function you to take
advantage of time variable economy
rates of electricity. Before you can use
this option, you must set up to three
electricity rate time zones (see “Settings
menu, EcoStart”).
Then set the time by which the selected
program has to be finished.
The dishwasher will then start
automatically in the most economical
rate zone within the time set.
 Use the arrow buttons to set the
hour and confirm with OK.
The hour will be saved and the minute
numerical keypad will be highlighted.
 Use the arrows to set the
minutes and confirm with OK.
The estimated start time for the
program selected will appear in the
display.
The and Start indicator lights will
light up.
The selected program will start
automatically during the most cost
effective time zone. It will finish at the
latest by the set finish time.
The time remaining will appear in the
display, the indicator will go out and
the Start indicator light will come on.
Changing or deleting set times
You can change the set times or start
the program before the start time in the
display is reached.
 Press the button.
 Use the arrow buttons to select
the setting you want to change and
confirm with OK.
 Use the arrow buttons in the
display to select the Change or Delete
function and confirm with OK.
After confirming the Change function,
you can change the set time.
After confirming the Delete function, the
program duration of the selected
program will appear in the display and
the program will start.
The indicator light goes out and the
Startindicator light lights up.