User profiles
10
User profiles
Daily operators
Daily operators must be instructed in operating and loading the
machine and trained regularly to guarantee safe daily use. They
require knowledge of machine reprocessing of laboratory glassware
and utensils.
Tasks for daily routine operation are located in the Settings menu.
This menu is freely accessible to all users.
Administration
More advanced tasks, e.g. interrupting or cancelling a programme,
require more detailed knowledge about the machine reprocessing of
laboratory glassware and utensils.
Alterations or adaptations of the machine, e.g. accessories used or
on-site conditions require additional specific knowledge of the
machine.
Validation processes assume specialised knowledge of the machine
reprocessing of laboratory glassware and utensils, of the processes
involved and of applicable standards and legislation.
Administrative processes and settings are allocated to Further
settings. This is protected from unauthorised access by a code.
To Next Page
Loading...
