Operation
59
Interrupting a programme
The factory default setting prevents interruption of programmes
while they are running. If required, this function can be activated by
Miele Service.
A programme which is already running should only be interrupted if
strictly necessary, e.g. if the wash load is moving about significantly.
Be careful when opening the door.
The load could be hot. Danger of scalding, burning, and chemical
burns.
Press the button.
You are asked if you really wish to open the door.
If the temperature in the wash cabinet is above 60°C at this moment,
it is first necessary to acknowledge the following message:
Warning. Cabinet hot!
Open anyway?
Confirm the message with OK.
Select Yes using the and arrow buttons.
By pressing the OK button the programme is interrupted.
Selecting Yes interrupts the programme and the door opens. The
display shows the following message:
Programme interrupted:
Door opened
Rearrange the items so that they are stable and close the door.
The programme continues from the point at which the interruption
occurred. Every programme interruption is recorded in the cycle
report.
If no button is pressed for several seconds, or if the process is
cancelled using the button, the display will revert to the
programme sequence display. The programme is not interrupted.
To Next Page
Loading...
