Miele PG 8593 - Dispensing Systems

Further settings
86
Dispensing systems
Up to two chemical agents can be dispensed in each wash block.
Using the following menu you can activate and vent the dispensing
system, change the name if necessary and set the dispensing
concentration for all programmes.
Activating
dispensing
systems
Individual dispensing systems can be activated or deactivated for all
programmes as follows.
 Open the menu as follows:
 button
Further settings
Dispensing system
DOS... (name of dispensing system)
DOS
Inactive
Active
- Active
The selected dispensing system is activated. Dispensing will only
occur in the appropriate wash blocks (see Programme charts).
- Inactive
The selected dispensing system is deactivated for all programmes.
 Select an option using the  and  arrow buttons.
 Press OK to save the setting.