Further settings
83
Air cooling
During the drying phase, the hot exhaust air from the wash cabinet is
released into the room via the steam condenser. Depending on the
size of the room, this can heat up the room to a greater or lesser
degree.
To reduce this effect, the heated air can be cooled down during the
drying phase using a fine spray in the steam condenser.
Cooling in the steam condenser will increase water consumption.
Open the menu as follows:
button
Further settings
Air cooling
- Yes
Hot air is cooled using the steam condenser.
- No
Hot air is released uncooled into the room.
Select an option using the and arrow buttons.
Press OK to save the setting.
To Next Page
Loading...
