Programme settings
110
Increasing
drainage time
If there is still water remaining in the wash cabinet at the end of a
wash block, because e.g. the on-site drainage system is inadequate,
the following error message will be displayed to enable water to be
drained out of the wash cabinet within the designated time:
In this case the drainage time can be increased.
...
Drain time
Drain time
Standard
Increased
- Standard
The standard drainage time setting applies.
- Increased
Drainage time is increased by a strictly preset increment.
Programme duration will increase with this setting.
Select an option using the and arrow buttons.
Press OK to save the setting.
To Next Page
Loading...
