Miele PG 8593 - Page 55

Operation
55
Setting the start
time
 Select a programme.
 Press the OKbutton before starting the programme.
Start time
 Use the arrow buttons(higher) and(lower) to set the hours,
and confirm your selection with the OKbutton.
When the OKbutton is pressed, the display jumps automatically to
the next input position. You cannot go back to the previous entry. If a
mistake is made, the process must be cancelled using the button
and repeated.
 Set the minutes using the arrow buttons(higher) and(lower),
and save your entry with OK.
The start time is now saved and can be changed as described at any
time up to activation of delay start.
Activating delay
start
 Delay start is activated with the Start/Stopbutton.
Universal
Temperature
Switch on at
12:30
75 °C
The selected programme with the set start time is then shown on the
display. If automatic deactivation has been selected (see “Further
settings/Switch off after”), the machine will switch itself off after the
set time until the programme start time is reached.
Deactivating delay
start
 Press the button or switch the machine off using the button.