Miele PWM 507 - Page 22

Before using for the first time
22
The programmes are activated (framed)
or deactivated (no frame).
 Confirm with the OKsensor.
The display switches back to the pro-
gramme packages.

Programme
packages


Disinfection

Continue

 Select other programme packages or
confirm your selection with the Con-
tinuesensor.
The display will change to the next set-
ting.
Setting up a payment system
If you wish to set up a payment system,
read “Payment system” under “Super-
visor level”.
If you do not wish to set up a payment
system, you can skip this stage.

Payment
system


No payment
system
Programme
control
 Touch the No payment systemsensor.
The display will change to the next set-
ting.
Select pre-wash water

Pre-wash
water
Cold
Hot
 Touch the coldsensor if the washing
machine is only connected to a cold
water supply, or touch hotif the
washing machine is connected to
cold and hot water.
The display will change to the next set-
ting.
Select main wash water

Main wash
water
Cold
Hot
 Touch the coldsensor if the washing
machine is only connected to a cold
water supply, or touch hotif the
washing machine is connected to
cold and hot water.
Further information will appear on the
display.