Operation
20
Setting numerical
values
You can set numerical values in some menus.
The following example shows how to set the time of day. The
“Supervisor level” section describes how to get to this level.
OK
12 00
10 58
14 02
11 59
13 01
Time
Enter the numbers by swiping upwards or downwards.
Place your finger on the number that you want to change and move
your finger in the desired direction. Use the OK symbol to accept the
set numerical value.
Useful tip: With some settings, a value can also be entered using a
numerical keypad.
OK
12 00
11 59
10 58
13 01
14 02
Time
Briefly touching the number between the two lines will bring up the
numerical keypad.
Once a valid number has been entered, the OK symbol will be
highlighted green.
To Next Page
Loading...
