Cleaning and care
48
Carry out cleaning and maintenance of the machine after use if
possible.
Do not use a pressure washer or hose to clean the machine.
Clean the machine casing, control panel and plastic parts with a
mild, non-abrasive detergent or with a soft damp cloth only. Wipe
dry with a soft cloth.
Scouring agents will scratch the surface.
Clean stainless steel casing with a proprietary stainless steel
cleaner.
Remove any deposits from the door seal with a damp cloth.
Do not allow cleaning agents to penetrate the electrical
components.
When disinfecting the surfaces, use a damp cloth only to clean the
front and around the door lock. Do not spray any liquids.
Build-up of rust
The drum is manufactured from rust-free stainless steel. Water or
foreign objects containing ferrous substances (e.g. paper clips, metal
buttons or metal splinters) which are placed in the machine with the
laundry can cause a build-up of rust in the drum. Clean the drum
regularly in this case and if rust occurs, remove it immediately with a
proprietary stainless steel conditioner. Check the door seals for
ferrous residues and clean thoroughly as described above. This must
be carried out regularly.
To Next Page
Loading...
Need help?
General
