Miele PWM 511 User Manual

Supervisor level
66
Time
After selecting the clock format, you can set the time of day.
Clock format
- 24h clock
- 12h clock
- No clock
Set
- The time can be set.
Date
The date can be set after selecting the date format.
Date format
- DD.MM.YYYY
- YYYY.MM.DD
- MM.DD.YYYY
Date
- The date can be set.
Volume
The volume for various sounds can be changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different levels or switched off altogether.
- Fault alarm
The fault alarm can be activated or deactivated.
Visibility
parameters
Various parameters, such as the temperature, spin speed, Extras
etc., are displayed when a programme is selected. You can decide
which parameters should not be displayed. The parameters cannot
be changed/are no longer displayed.
Factory default: all parameters are visible (marked in orange)
“Machine off”
status
In order to save energy, the washing machine can be set to switch
to standby mode automatically after the end of the programme or if
no further selection is made. In the default setting, the machine will
not switch to standby mode automatically.
Changing this setting leads to increased energy consumption.
- No switch-off (factory default)
- Switch off after 15minutes
- Switch off after 20minutes
- Switch off after 30minutes

Miele PWM 511 Specifications

General

Brand	Miele
Model	PWM 511
Category	Washer
Language	English